Υπερυψωμένα Δάπεδα - Συνεδριακά Καθίσματα - Λωρίδες Βινυλίου LVT
Το Linoleum είναι ένα υλικό κατασκευασμένο εξ’ ολοκλήρου από φυσικές πρώτες ύλες όπως λιναρόσπορο, ξυλάλευρο, γιούτα, ρητίνες και ασβεστόλιθο. Είναι ανθεκτικό σε βαριά φορτία καθώς και στις αυλακώσεις από μετακινούμενα έπιπλα. Έχει μακρύ χρόνο ζωής και χρηστικότητας είναι υγιεινό από την φύση του αντιστατικό. Απολύτως φιλικό στο περιβάλλον απευθύνεται στην οικολογική συνείδηση του χρήστη. Αναλόγως με την μέθοδο παρασκευής διάφορα χρώματα και σχέδια είναι δυνατόν να επιτευχθούν.
Όσο υπάρχει ήλιος και βροχή θα είναι δυνατή η παρασκευή Linoleum. Το Marmoleum για παράδειγμα είναι προϊόν ανεξάντλητων φυσικών πρώτων υλών. Πρώτες ύλες καρπών της φύσης όπως Λινέλαιο από την Αργεντινή και τον Καναδά, ξυλάλευρο από την Γερμανία και τις Σκανδιναβικές Χώρες, γιούτα από την Ινδία και το Μπαγκλαντές. Ρητίνες από την Ινδονησία και την Κίνα και χρώματα από τη Ευρώπη. Το λινέλαιο και οι φυσικές ρητίνες οξειδώνονται σε μίγμα μέσα στο οποίο αναδεύονται όλα τα υπόλοιπα συστατικά που αναφέραμε και δημιουργούν μία πάστα υλικού που απλώνεται πάνω στα φύλλα γιούτας. Τα φύλλα αυτά που έχουν μήκος χιλιομέτρων απλώνονται σε ειδικά στεγνωτήρια μέχρι το τελικό υλικό να αποκτήσει την τελική σκληρότητα. Τέλος τα φύλλα κόβονται σε ρολά 30 μέτρων και στιλβώνονται. Σε όλη την προαναφερθείσα διαδικασία εντατικός ποιοτικός έλεγχος λαμβάνει χώρα.
| Marmoleum Technical Specifications | ||
| Marmoleum Real/Fresco/Mosaic and Walton meet the requirements of EN 548. | ||
 | Fire resistance | In accordance with DIN 4102-1: Class B1. In accordance with NEN 1775: Class T1. |
| Inflammability | In accordance with ISO 6925: difficult to ignite. | |
 | EN 1399. | Marks left on linoleum as a result of stubbed-out cigarettes can be easily removed. Sandpaper gently and apply a new coat of polish. Linoleum does not melt. |
 | Castor resistance | In accordance with EN 425: suitable for office chairs with castors. |
 | Antistatic | Static charge on persons remains under 2 KV, measured in accordance with EN 1815/ISO-TR 6356. Test material is stuck to a standard subfloor using a standard adhesive. |
| Safety resistance | Measured in accordance with VDE 0100/T600: >5.104 Ohm. | |
| Marmoleum Ohmex: Electrical resistance | In accordance with EN 1081/DIN 51953: 1.106 <R1<1.108 Ohm. | |
 | Impact sound reduction | In accordance with ISO 717-2: max. 6 dB. A higher figure of >= 14 dB can be achieved by installing a 2.0 mm Corkment underlay. |
 | Colour fastness | In accordance with ISO 105-B02, method 3: minimum blue scale 6. Depending on the colour, the colour fastness is usually higher, often being 8 (blue scale maximum is 8). The samples may differ slightly from the material supplied. |
 | Indentation resistance | In accordance with EN 433: 2.0 mm: approx. 0.07 mm 2.5 mm: approx. 0.08 mm 3.2 mm: approx. 0.10 mm req.: =< 0.15 mm 4.0 mm: approx. 0.13 mm req.: =< 0.20 mm |
 | Flexibility | In accordance with EN 435: 2.0 mm: 30 mm o 2.5 mm: 40 mm o 3.2 mm: 50 mm o 4.0 mm: 60 mm o |
 | Chemical resistance | In accordance with EN 423: Marmoleum is resistant to diluted acids, oils, fats and to the conventional solvents, such as alcohol, white spirit etc. Not resistant to prolonged exposure to alkalis. |
 | Suitable for underfloor heating. | |
| Heat resistance | In accordance with DIN 52612: 2.0 mm: approx. 0.012 m2. K/W 2.5 mm: approx. 0.014 m2. K/W 3.2 mm: approx. 0.018 m2. K/W 4.0 mm: approx. 0.023 m2. K/W | |
| Thermal conductivity coefficient | 0.17 W/m2. K. | |
 | Areas of application 2.0 mm | rooms in homes for the elderly, nurses’ homes, apartments, hotel rooms, social housing, wards, living rooms, bedrooms, kitchens, corridors, attics, hobby rooms. |
| Areas of application 2.5 mm | offices, hospitals, nurses’ homes, airports, canteens, warehouses, schools, shops, ships, stairs, hotels, restaurants, laboratories, banks, post offices, theatres, station halls, exhibition halls, sports halls, department stores, discotheques and barracks. | |
| 3.2 mm and 4.0 mm can be specified to comply with special customer requirements e.g. buses, trains and trams. | ||
| Technical specifications measured at 23°C and 50% relative atmospheric humidity (April 1997). | ||
European classification system according to EN 685 | |||
| Area of application | DOMESTIC | COMMERCIAL | INDUSTRIAL |
| 2.0mm | Class 23 (heavy) | Class 32 (normal) | Class 41 (moderate) |
| 2.5mm | Class 23 (heavy) | Class 34 (heavy) | Class 42 (general) |
| 3.2/4.0mm | Class 23 (heavy) | Class 34 (heavy) | Class 42/43* (general) |
| *Specifications for class 43 will be determined in joint consultation. This may also be applicable with regard to other thicknesses. | |||
| ARTOLEUM 2.0mm and 2.5mm | |||||||||||||||||||
| Artoleum meets the requirements of EN 548. | |||||||||||||||||||
 | Fire resistance | In accordance with DIN 4102-1: Class B1. | |||||||||||||||||
| Inflammability | In accordance with ISO 6925: Difficult to ignite. | ||||||||||||||||||
| EN 1399 | Marks left on linoleum as a result of stubbed-out cigarettes can be easily removed. Sandpaper gently and apply a new coat of polish. Linoleum does not melt. | ||||||||||||||||||
 | Castor resistance | In accordance with EN 425: Suitable for office chairs with castors. | |||||||||||||||||
 | Antistatic | Static charge on persons remains under 2 KV, measured in accordance with EN 1815. Test material is adhered normally to a standard subfloor. | |||||||||||||||||
| Safety resistance | Measured in accordance with VDE 0100/T600: > 5.104 Ohm | ||||||||||||||||||
 | Impact sound reduction | In accordance with ISO 717-2: max. 6 dB. A higher figure of >= 14 dB. can be achieved by installing a 2.0 mm Corkment underlay. | |||||||||||||||||
 | Colour fastness | In accordance with ISO 105-B02, method 3: minimum blue scale 6. Depending on the colour, the colour fastness is usually higher, often being 8 (blue scale maximum is 8). The samples may differ slightly from the Artoleum supplied. | |||||||||||||||||
 | Indentation resistance | In accordance with EN 433 (req.: =< 0.15 mm): 2.0 mm: approx. 0.07 mm 2.5 mm: approx. 0.08 mm | |||||||||||||||||
 | Flexibility | In accordance with EN 435: 2.0 mm: 30 mm o 2.5 mm: 40 mm o | |||||||||||||||||
 | Chemical resistance | In accordance with EN 423: Artoleum is resistant to diluted acids, oils, fats and to the conventional solvents, such as alcohol, white spirit etc. Not resistant to prolonged exposure to alkalis. | |||||||||||||||||
 | Suitable for underfloor heating. | ||||||||||||||||||
| Heat resistance | In accordance with DIN 52612: 2.0 mm: approx. 0.012 m2. K/W 2.5 mm: approx. 0.014 m2. K/W | ||||||||||||||||||
| Thermal conductivity coefficient | 0.17 W/m. K. | ||||||||||||||||||
| Measured at 23°C and 50% relative atmospheric humidity. | |||||||||||||||||||
  | |||||||||||||||||||
| |||||||||||||||||||
 | Artoleum is provided with an ETC-finish. It is not necessary to strip the floor covering after installation and apply another finish. | ||||||||||||||||||
 | We recommend cleaning Artoleum 'dry'. Dust wiping is the most effective and efficient method of removing loose dirt. If there are stains, spot-treatment is sufficient. | ||||||||||||||||||
 | Artoleum has bacteriostatic properties, which are confirmed by famous laboratories such as TNO (The Netherlands) and NAMSA (USA), even against the bacteria MRSA. | ||||||||||||||||||
 | Artoleum is a perfect floor covering for almost every area: domestic, hospitals, schools, offices and other commercial and light-industrial applications. We do not however recommend installing Artoleum in wet areas. | ||||||||||||||||||
